GMC

Home / GMC

We Service and Repair all GMC cars

  • 2008 GMC Yukon XL

    GMC Yukon XL
    Mileage
    184,856
    Service Date
    12/8/2023
    Services Performed
    • DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
    • CALIPER – Remove & Replace – Rear,Both – [Includes: Perform ABS Automated Bleed procedure.] – [Includes: Bleed Brake System and replace Pads (if necessary).]
     
    Mike R. gave our service a 5 star review on 12/21/2023
  • 2008 GMC Yukon XL

    GMC Yukon XL
    Mileage
    182,249
    Service Date
    6/23/2022
    Services Performed
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
    • Includes scan for codes PO158 and reset ECM.
    • Replace TPMS sensor right rear.
     
    Mike R. gave our service a 5 star review on 6/27/2022
  • 2013 GMC Terrain

    GMC Terrain
    Mileage
    134,252
    Service Date
    3/30/2022
    Services Performed
    • Scan for codes PO420,P2119.
    • THROTTLE BODY ASSEMBLY – Remove & Replace – In-Line4 – [Includes: Perform Relearn procedure.]
     
    MAX Q. gave our service a 5 star review on 4/4/2022
  • 2015 GMC Terrain

    GMC Terrain
    Mileage
    57,849
    Service Date
    4/29/2021
    Services Performed
    • BATTERY – Remove & Replace – [Includes: Test.]
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
     
    ANDREW F. gave our service a 5 star review on 5/5/2021
  • 2005 GMC Yukon

    GMC Yukon
    Mileage
    168,227
    Service Date
    9/13/2018
    Services Performed
    • IDLER ARM – Remove and Replace – AWD w/o Skid Plate – [DOES NOT include alignment.]
    • PITMAN ARM – Remove and Replace – All Applicable Models – [Includes: R and I Steering Gear Assembly.] – [DOES NOT include alignment.]
    • TIE ROD END – Remove and Replace – C1500,K1500 Inner,Both – [Includes: R and I Outer Tie Rod Ends.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when repl
    • Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
     
    KEN C. gave our service a 5 star review on 9/15/2018
  • 2010 GMC Yukon XL

    GMC Yukon XL
    Mileage
    139,213
    Service Date
    4/2/2018
    Services Performed
    • WINDSHIELD WASHER
    • Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
     
    CHRIS G. gave our service a 5 star review on 4/18/2018